ELISA Kit for Barrier To Autointegration Factor 1 (BANF1)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Barrier To Autointegration Factor 1 (BANF1) . Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Barrier To Autointegration Factor 1 (BANF1) . Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Barrier To Autointegration Factor 1 (BANF1), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Barrier To Autointegration Factor 1 (BANF1) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Intra-assay Precision (Precision within an assay) : 3 samples with low, middle and high level Barrier To Autointegration Factor 1 (BANF1) were tested 20 times on one plate, respectively. Inter-assay Precision (Precision between assays) : 3 samples with low, middle and high level Barrier To Autointegration Factor 1 (BANF1) were tested on 3 different plates, 8 replicates in each plate. CV (%) = SD/meanX100 Intra-Assay: CV Inter-Assay: CV Inter-Assay: CV

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

This assay has high sensitivity and excellent specificity for detection of Barrier To Autointegration Factor 1 (BANF1) . No significant cross-reactivity or interference between Barrier To Autointegration Factor 1 (BANF1) and analogues was observed.