CO2 Incubator Air Jacketed BCAJ-6602

• Replace traditional button operation to touch screen interface. • It can display on time performance curve. You can check the temp., humidity and CO2 concentration three group curves changes at the same time. And abnormal alarm and door open or close message • When parameters are set, the controller will lock the screen automatically, it avoid unauthorized person wrong operation on the machine • 72 hours machine performance inquiry, it is convenient for user to check abnormal situation and track historical running information • RS-485 communication port as options can be remote control on computer for monitoring the running and start or close the machine • PT100 temp. sensor keeps inside chamber temperature accurate. It can adjust the heating power according to the temp. differences between actual temp. in the chamber and set temp. to make sure temp. in the chamber is accurate. It can resume experiment temp. in 3 min after user open and close door to take samples • Water jacket heating method to ensure working chamber temperature is uniform, when it is power off, the chamber can maintain the temp. for a long time • Outer door ring has heating function. The temperature of door ring will be a little bit higher than temp. in the chamber to prevent condensed water coming from the inner glass door. It facilitates observe the experiment process, also it avoid the biological pollution possibility due to the condensed water from the inner glass door • Simple operation: The user just press the sterilization start button on the control panel, the sterilization system starts to thoroughly sterilize the chamber (Including temp. sensor, CO2 concentration sensor, fan, shelves and brackets etc) • The whole sterilization cycle is shorten to 18 hours